The upward trend in the cost of traditional fuels has been observed all over the world for more than a year – as well as the search for opportunities to use cheaper alternative types of energy. Recently, the installation of solar panels has been gaining special popularity – after all, this is a real chance to abandon traditional sources of fuel in favor of the inexhaustible potential of solar energy. The service of the professional installation of solar panels is offered by Solarmasters, the leader of the Australian market for the development and implementation of innovative solar solutions in the field of energy conservation.
High Tech Technologies uses in the Solar Panels
Despite the fact that people who use solar panels are still considered innovators, their number is constantly growing. This is explained by the enormous prospects that the installation of solar panels Townsville opens up for ordinary consumers. First of all – the ability to minimize the cost of electricity bills. Devices that we know as solar panels belong to the high-tech type of equipment, as they are capable of not only absorbing but also converting the energy of solar light into electricity. The most common are devices of a flat shape – the so-called solar panels. Thanks to this configuration, it became possible to install solar panels on any surface.
But to ensure maximum conversion of solar energy, the installation of solar panels provides for the correction of the angle of inclination – in accordance with the geographical data of the area. An incorrectly defined place for the installation of solar collectors and non-compliance with the rules for choosing the optimal tilt of the device reduces the module efficiency of their work. Therefore, in order to install solar panels, business companies only hire highly qualified specialists like us.
Types of Solar Panels and how they are different from each other
Solar panels differ in the type of materials used in production; the main types of solar panels currently in use are polycrystalline and single-crystal panels or Monocrystalline Panels.
The main difference between monocrystalline and polycrystalline panels is the efficiency of solar power GoldCoast conversion. Monocrystalline panels have the highest efficiency – up to 22%. Monocrystalline silicon is made from highly purified raw materials (99.99%). Now there are solar modules made using PERC technology (Passivated Emitter Rear Cell) – a passivated emitter of the rear contact and means the dielectric layer on the back of the PERC solar cell.
Commercially available polycrystalline cells have an efficiency of up to 18%. The lower efficiency is associated with the fact that in the production of polycrystalline silicon not only primary silicon of high purity is used, but also secondary raw materials (for example, recycled solar panels or silicon waste from the metallurgical industry). This leads to the appearance of various defects in the polycrystalline element. The efficiency of the elements is ultimately responsible for the physical size of the solar panels. The higher the efficiency, the smaller the panel area at the same power.
A fresh report is out gently delayed highlights the amazing rate of expansion of non-conventional power transversely in Australia. A sustainable source of energy has maintained a rigid foundation in the electrical industry. Global warming and air & water pollution are the major issues surrounding the use of fossil fuel in energy generation. Using the renewable sources of energy are also important for depleting the use of conventional sources like fossil fuels, coal and other non-renewable sources of energy which increases Global Warming.
Renewable Sources of Energy to help out the Australian Industrial Sector
Using renewable sources for energy accurately is the first needs of human beings to counter the effects of pollution spread by conventional sources. We must find a greater source for generating energy and fulfilling our residential and commercial needs and renewable sources of energy are the topmost solution for this. Renewable energy sources have almost neglected carbon footprints in comparison with the carbon footprints of fossil fuels. Plus, with the unstoppable development in the Australian Industrial Area, there is a high requirement for the renewable sources of energy. However, introducing the commercial solar to the individual businesses considered as the best way to booming renewable energy Australia.
Renewable Energy Target 2020
Clean Energy Council of Australia had introduced the RET (Renewable Energy Target) scheme in 1st of April 2001. What’s more? Solar energy is the top contributor to meet the ends of renewable energy target for Australia which is supposed to make sure that Australia would generate near about 33,000 GWh by the year 2020. Previously, the similar Target had already shown up its positive effects on Australian Solar energy Boom when it was aimed to introduce residential solar in Australia by the years from 2010 to 2013. Along with completing the current targets in the next year, commercial solar power plants with solar inverter installation Brisbane would be built following the booming Australian Commercial Solar. According to the experts, the commercial solar energy generation would be increased almost two times with this target.
Efforts, Incentives, and Outcomes
Australia is planning to rely more on renewable sources of energy to empower residential and commercial energy needs. With this, solar companies are being noticed by the Clean Energy Council to support the commercial and residential solar installations. Solar provider companies have full support from the Australian Government and Clean Energy Council as well. More and more Industrialists and business owners have started making their attention towards powering up their whole business with commercial solar. Continuously increase in energy bills comes from the mains grid are also making them thinking about the commercial rooftop PV solar installing. Government providing subsidies makes it easy for the business owners to empower their businesses with the commercial solar. They are showing curiosity in the complete solar power system along with the solar battery storage Queensland. With all this planning and efforts, it is positively assumable about the boom in the Australian Commercial Solar.